Views: 0 Author: Site Editor Publish Time: 2023-04-17 Origin: Site
The pneumatic grinder uses abrasive tools to grind the surface of the workpiece. This article will introduce the relevant knowledge of pneumatic grinders, I hope it will be helpful to everyone.
Daily maintenance of pneumatic grinder.
The company has pneumatic grinder products.
Pneumatic grinders must have a dedicated person responsible for maintenance and use, and regular maintenance to ensure that the pneumatic grinders are in good condition.
1. After the operation is completed, all parts of the machine, especially the sliding parts, should be wiped clean and oiled.
2. Remove grinding debris from various parts of the grinder.
3. The necessary parts of the pneumatic grinder are rust-proof.
Precautions for maintenance of pneumatic grinders
1. Before grinding with pneumatic grinder, please correct the balance of the grinding wheel.
2. The pneumatic grinder must carefully select the grinding wheel according to the material and hardness of the work piece.
3. The spindle end and the flange of the grinding wheel should be coated with a thin oil film to prevent rust.
4. Please pay attention to the direction of spindle rotation.
5. It is forbidden to use air guns to clean work objects and pneumatic grinders.
6. Please pay attention to whether the oil window oil circuit is smooth.
7. Dust suction box, filter steel, please clean it once a week.
8. When the suction power is weak, please check whether the dust suction pipe is blocked by dust.
9. Keep the dust suction pipe clean, otherwise it will burn.
Maintenance of lubrication system of pneumatic grinder
The lubricating oil is replaced after one month of initial use, and every 3-6 months thereafter. There is an oil drain plug under the oil tank, which can be used. Please also note that when changing the oil, clean the inside of the pneumatic grinder tank and the filter together.
Dongguan Kaibao Precision Machinery Co., Ltd. was established in 2009 and is located in Dongguan City, Guangdong Province, which is close to the Shenzhen seaport. We have our brand names "Pandas" and "Super", which are well received by customers for wind sand machines. At present, the company's plant covers an area of 4,500 square meters, with 56 assembly personnel with more than 56 years of experience, and 8 technical personnel with rich development experience, providing product research and development services. Over the years, the company has received support from many customers around the world, while absorbing international advanced technology, listening to users’ opinions, and constantly innovating. In order to ensure the stability and high quality of our products, most of the accessories and materials for grinders and polishing machines are imported from Germany, Japan and Taiwan. We have 120 three-axis and four-axis machining centers, lathes, washing machines, internal grinders, cylindrical grinders, surface grinders and other processing equipment.
Mainly produce pneumatic sanding machines, electronic sanding machines, pneumatic polishing machines, electronic polishing machines, pneumatic grinders, air mold grinding machines, air mold grinding pens, professional automatic manipulator polishing machines and sanding support pads.
If you are satisfied with our company's pneumatic grinder, you can directly order or inquire about pneumatic grinders. We will provide you with the best pneumatic grinder products and services. Looking forward to your visit, I wish you success in your work.