Views: 0 Author: Site Editor Publish Time: 2023-05-02 Origin: Site
The pneumatic grinder uses abrasive tools to grind the surface of the workpiece. This article will introduce the relevant knowledge of pneumatic grinders, I hope it will be helpful to everyone.
Safety protection of pneumatic grinder.
The company has pneumatic grinder products.
Pneumatic grinders are widely used and are one of the main methods for precision machining of machine parts. However, due to the high speed of the grinding wheel of the grinder, the grinding wheel is relatively hard, brittle, and cannot withstand heavier impact. Occasionally improper operation can cause very serious consequences if the grinding wheel is broken. Therefore, the safety and technical work of pneumatic grinders is particularly important. Reliable safety protection devices must be adopted. The operation of pneumatic grinders must be focused to ensure foolproof. In addition, the fine sand and metal shavings splashed from the workpiece of the grinding wheel during grinding can hurt the eyes of workers. If workers inhale a large amount of this kind of dust, it is harmful to the body. Appropriate protective measures should also be taken. Attention should be paid to the following safety technical issues when processing pneumatic grinders.
Before starting the pneumatic grinder, a comprehensive inspection of the pneumatic grinder machine should be carried out, including the inspection of the operating mechanism, electrical equipment and magnetic suction cups and other fixtures. The pneumatic grinder is lubricated after inspection, and then tested after lubrication to confirm that everything is in good condition before use.
When replacing the grinding wheel, you must first check the appearance of the pneumatic grinder to see if there is any trauma, and then hit it with a wooden hammer or stick. The sound is required to be crisp and free of cracks. The pneumatic grinder must be assembled according to the specified methods and requirements when installing the grinding wheel. After static balance debugging, the installation should be carried out, and the pneumatic grinder can be used after everything is normal.
Dongguan Kaibao Precision Machinery Co., Ltd. was established in 2009 and is located in Dongguan City, Guangdong Province, which is close to the Shenzhen seaport. We have our brand names "Pandas" and "Super", which are well received by customers for wind sand machines. At present, the company's plant covers an area of 4,500 square meters, with 56 assembly personnel with more than 56 years of experience, and 8 technical personnel with rich development experience, providing product research and development services. Over the years, the company has received support from many customers around the world, while absorbing international advanced technology, listening to users’ opinions, and constantly innovating. In order to ensure the stability and high quality of our products, most of the accessories and materials for grinders and polishing machines are imported from Germany, Japan and Taiwan. We have 120 three-axis and four-axis machining centers, lathes, washing machines, internal grinders, cylindrical grinders, surface grinders and other processing equipment.
Mainly produce pneumatic sanding machines, electronic sanding machines, pneumatic polishing machines, electronic polishing machines, pneumatic grinders, air mold grinding machines, air mold grinding pens, professional automatic manipulator polishing machines and sanding support pads.
If you are satisfied with our company's pneumatic grinder, you can directly order or inquire about pneumatic grinders. We will provide you with the best pneumatic grinder products and services. Looking forward to your visit, I wish you success in your work.
