Common faults of pneumatic sander

Pneumatic sander is the mechanical equipment used to complete the sanding work. It involves a wide range of categories in the industry. This article will introduce the relevant knowledge of the pneumatic sander, and I hope it will be helpful to everyone.

• Common failures of pneumatic sanders.

• The company has pneumatic sander products.

Common failures of pneumatic sanders.

During the operation of the pneumatic sander, faults often occur, which should be eliminated in time. If it is not handled properly, it may affect production and increase costs. The following is an analysis of the common faults of the pneumatic sander.

⒈The belt deviation of the pneumatic sander is generally caused by improper adjustment. The normal belt swing is 15-20mm, the swing frequency is 15-20 times/min, the swing speed is moderate and the swing in and out speeds are consistent. If the pneumatic sander is in an abnormal state for a long time, deviation may occur. The poor dust collection of pneumatic sander and high dust concentration will affect the normal operation of the photoelectric cell, and also cause the belt deviation; damaged parts should be replaced in time to improve the dust removal effect.

⒉Pneumatic sander limit failure, limit switches on both sides of the sanding belt, when the sanding belt swings and deviates to one side, touch the limit switch, the sanding belt is released, the main motor automatically stops, which can effectively protect the sand belt. Once the limit failure of the pneumatic sander can cause damage to the sanding belt, the friction frame will produce sparks, and even cause a fire. Therefore, the limit switch of the pneumatic sander should always be checked for reliability.

The company has pneumatic sander products.

Dongguan Kaibao Precision Machinery Co., Ltd. was established in 2009 and is located in Dongguan City, Guangdong Province, which is close to the Shenzhen seaport. We have our brand names "Pandas" and "Super", which are well received by customers for wind sand machines. At present, the company's plant covers an area of 4,500 square meters, with 56 assembly personnel with more than 56 years of experience, and 8 technical personnel with rich development experience, providing product research and development services. Over the years, the company has received support from many customers around the world, while absorbing international advanced technology, listening to users’ opinions, and constantly innovating. In order to ensure the stability and high quality of our products, most of the accessories and materials for grinders and polishing machines are imported from Germany, Japan and Taiwan. We have 120 sets of three-axis and four-axis machining centers, lathes, washing machines, internal grinders, cylindrical grinders, surface grinders and other processing equipment.

Mainly produce pneumatic sander, electronic sanding machine, air polishing machine, electronic polishing machine, air angle grinder, air mold grinder, air mold grinding pen, professional automatic manipulator polishing machine and sanding support pad.

If you are satisfied with our pneumatic sander, you can directly order or consult the pneumatic sander related questions. We will provide you with the best pneumatic sander products and services. Looking forward to your visit, I wish you success in your work.