Views: 0 Author: Site Editor Publish Time: 2023-05-23 Origin: Site
Pneumatic sanding machine is the mechanical equipment used to complete the sanding work. It involves a wide range of categories in the industry. This article will introduce the relevant knowledge of the pneumatic sanding machine, and I hope it will be helpful to everyone.
Trouble and solve the problem of pneumatic sanding machine.
The company has pneumatic sanding machine products.
1 When the pneumatic sander is empty, the conveying roller rotates intermittently or does not rotate or is working. Generally, the above situation cannot be observed. It can only be found when the pneumatic sander is empty. The reason is that part of the worm gear is worn or the worm gear is decelerated during the transmission of power. All worn. Although it will not affect the work of the pneumatic sander, other worm gears will shorten their life and cause greater losses due to increased workload. Therefore, once the pneumatic sander is found to be in this situation, it should be replaced immediately.
2 The main bearing seat of the pneumatic sander vibrates abnormally. : Under normal circumstances, the vibration of the main bearing housing is very small. An experienced operator can judge whether it is normal or not. Generally, there is no condition to measure with instruments on site, but it can be judged by comparison with other bearing housings, or from the surface of the sanding board. To judge the pros and cons. When the bearing seat vibration of the pneumatic sander is abnormal, it can be considered that there are two reasons. One is that the bearing of the pneumatic sander is damaged. Just replace the bearing. The other is that the contact roller of the pneumatic sander is worn and lost. The dynamic balance is damaged, causing abnormal vibration. In this case, the sand roller must be removed for maintenance.
Dongguan Kaibao Precision Machinery Co., Ltd. was established in 2009 and is located in Dongguan City, Guangdong Province, which is close to the Shenzhen seaport. We have our brand names "Pandas" and "Super", which are well received by customers for wind sand machines. At present, the company's plant covers an area of 4,500 square meters, with 56 assembly personnel with more than 56 years of experience, and 8 technical personnel with rich development experience, providing product research and development services. Over the years, the company has received support from many customers around the world, while absorbing international advanced technology, listening to users’ opinions, and constantly innovating. In order to ensure the stability and high quality of our products, most of the accessories and materials for grinders and polishing machines are imported from Germany, Japan and Taiwan. We have 120 sets of three-axis and four-axis machining centers, lathes, washing machines, internal grinders, cylindrical grinders, surface grinders and other processing equipment.
Mainly produce pneumatic sanding machine, electronic sanding machine, air polishing machine, electronic polishing machine, air angle grinder, air mold grinder, air mold grinding pen, professional automatic manipulator polishing machine and sanding support pad.
If you are satisfied with our pneumatic sanding machine, you can directly order or consult the pneumatic sanding machine related questions. We will provide you with the best pneumatic sanding machine products and services. Looking forward to your visit, I wish you success in your work.