Safe operation of pneumatic sander

Pneumatic sanding machine is the mechanical equipment used to complete the sanding work. It involves a wide range of categories in the industry. This article will introduce the relevant knowledge of the pneumatic sanding machine, and I hope it will be helpful to everyone.

• Safe operation of pneumatic sander.

• The company has pneumatic sanding machine products.

Safe operation of pneumatic sander.

1. The operator must be familiar with the performance, purpose and operation precautions of the pneumatic sander before operation. Novices are strictly prohibited to operate on the machine alone, and non-related personnel are not allowed to approach the pneumatic sander

2. Operators are not allowed to wear clothes that are easily caught by the pneumatic sander (such as neckties, necklaces, loose clothes, etc.). Those with long hair should curl up their hair or wear a headgear. It is strictly forbidden to wear gloves to operate the pneumatic sander.

3. Do not dismantle the safety device on the pneumatic sander at will, and do not place any non-work objects on the workbench, such as wrenches, to prevent foreign objects from jamming and causing damage to the pneumatic sander

4. Before turning on the power switch of the pneumatic sander, be sure to confirm that all switches are in the OFF position. Before the pneumatic sander works normally, check the sharpness of the sanding belt and check whether the installation direction of the sanding belt is correct (on the back of the belt). The arrow points are consistent with the direction of the rubber wheel), whether the abrasive belt specifications are applicable, whether the sanding belt swing is moderate, whether the sanding belt is moderately tight, whether the conveyor belt running track is moderate, whether the conveyor belt is moderately tight, and whether the planer blade is installed correctly and firmly

The company has pneumatic sanding machine products.

Dongguan Kaibao Precision Machinery Co., Ltd. was established in 2009 and is located in Dongguan City, Guangdong Province, which is close to the Shenzhen seaport. We have our brand names "Pandas" and "Super", which are well received by customers for wind sand machines. At present, the company's plant covers an area of 4,500 square meters, with 56 assembly personnel with more than 56 years of experience, and 8 technical personnel with rich development experience, providing product research and development services. Over the years, the company has received support from many customers around the world, while absorbing international advanced technology, listening to users’ opinions, and constantly innovating. In order to ensure the stability and high quality of our products, most of the accessories and materials for grinders and polishing machines are imported from Germany, Japan and Taiwan. We have 120 sets of three-axis and four-axis machining centers, lathes, washing machines, internal grinders, cylindrical grinders, surface grinders and other processing equipment.

Mainly produce pneumatic sanding machine, electronic sanding machine, air polishing machine, electronic polishing machine, air angle grinder, air mold grinder, air mold grinding pen, professional automatic manipulator polishing machine and sanding support pad.

If you are satisfied with our pneumatic sanding machine, you can directly order or consult the pneumatic sanding machine related questions. We will provide you with the best pneumatic sanding machine products and services. Looking forward to your visit, I wish you success in your work.